Part 2 - Extraction of oil from seeds of Ankola or Ankolla

First process.

Root of uttaravaruni is to be pestled with kanji with which is to be mixed seeds of ankolla, pestled very fine. The whole thing is to be mixed well. The inner surface of a bell-metal pot is to be smeared with this paste and kept in the sun. The thick oil, which will come out of the paste, is to be filtered by means of a fine piece of cloth,

Leaves of uttara-varuni and petakari are to be rubbed with kanji and made into a paste. Powdered seeds of ankolla are to be rubbed with this paste, which is then to be confined in a piece of thin cloth and kept hanging in the sun over a pot meant to contain the oil which is to fall, drop by drop, upon it. This oil cures Leucoderma.

Second process.

Mouths of ankola seeds, previously separated from their husks, are to be rubbed a little. Each of them is then to be kept on a bell-metal pot, and smearad all round with chanaka grams made into a paste. The mouth of each of these is to be smeared with a paste made of powdered borax (tankana). All of these seeds are then to be placed in the strong heat of the sun. Oil, coming out of the mouths of these seeds, is then to be collected.